He is darling with his yellow googly eyes, and has a tiny bit of shiny to his scales.
0 Comments
All deliver a reliable, high bandwidth link to the satellite on all maritime frequencies, ensuring continuous availability of voice and data communications regardless of location and conditions. Parabolic antennas are classed as ‘high gain’ systems and have very low limitations on the amount of bandwidth they can transmit and receive, making them ideal for next generation networks that serve as a backbone to digital transformation and smart shipping.Ĭobham SATCOM offers a complete range based on decades of experience in developing and maximising the potential of the parabolic design. Parabolic antennas come in almost any size, from compact 60 cm VSAT through to 6 metre diameter ground station tracking systems. The digital transformation of the maritime industry is already leading to fully autonomous shipping: satellite communication is a must to succeed with autonomous shipping and choosing the best satellite and radio communication platform to implement ‘smart’ procedures can benefit your fleet and business here and now. Parabolic reflectors are used to collect energy from a distant source (for example sound waves or incoming star light). Without this, the parabolic shape of the antenna is not enough to ensure accuracy in pointing the antenna towards the satellite. To ensure a stable link to the satellite, maritime parabolic antennas must feature stabilisation, a powered, mechanical system that can counteract the movement of the vessel in six degrees of freedom. When receiving data, the dish bounces the radio signal to the feed antenna, which converts it to a digital signal and sends it further into the network. They both have a focal point, and they both take the scattered rays of a point. When transmitting information, the feed antenna converts a digital signal to radio and directs it at the parabolic dish, which then bounces the signal back up to the satellite. A Parabolic Reflector has the same effect on light rays as a Fresnel Lens. Parabolic antennas feature a parabolic dish and a small feed antenna. A key reason for this is that the parabolic shape of the reflector makes it easy to direct the radio signal, and on a mobile platform (i.e., a ship), this makes all the difference. Parabolic reflector antennas, also known as satellite dishes are the industry standard antenna type for maritime satellite communications. Reliable Wi-Fi and internet is key to seamless communications and entertainment at sea. The HPBWįront-to-back ratio is approximately 33 dB.With the proliferation of smart devices in their lives, ship passengers have come to regard easy access to social media, or video on demand at sea, as essential components of the passenger experience. The 3D patterns are shown in the following figures.Īs can be seen, the pattern is highly directional. The parabolic dish antenna is the form most frequently used in the. Since the principles of reflection are reversible, parabolic reflectors can also be used to collimate radiation from an isotropic source into a parallel beam. Alter incoming plane waves traveling along the same axis as the parabola into a wave that is spherical and they all meet at the focus of the reflector. Parabolic Reflectors Parabolic reflectors are used to collect energy from a distant source (for example sound waves or incoming star light). A circular horn antenna will be used as the feed.įrom the physical aperture is the actual gain is 29.3 dB = 851, so we canĬonclude that the overall efficiency is 77%. A parabolic reflector, dish, or mirror is a device that is used to collect or project energy such as electromagnetic waves. This example will beįor a parabolic dish reflector with the diameter of the dish D equal to 11 wavelengths. In this section, the 3d radiation patterns are presented to give an idea of what they look like. Parabolic Dish Reflector Antenna () The Parabolic Reflector Antenna (Satellite Dish) - Radiation Patterns Previous: Parabolic Dishes () Antenna Types Antennas (Home)
The USPTO recommends checking the status five to seven days after the initial application is submitted, but reports indicate that the process may take months if errors are found.Īfter being received, the filing is assigned a serial number and a government trademark attorney. Once the application is submitted, the application status can be checked using the Trademark Status and Document Retrieval (TSDR). The USPTO provides detailed instructions on how to navigate the online application, depending on the filing option. The application can be completed on the USPTO’s website. If you trademark a black and white version, you can add or change colors without filing a new trademark application. A business owner must amend the initial application or re-apply for a new trademark if any changes are made to the logo’s color. While many logos are displayed in color on products or in marketing materials, registering for a trademark in color means that the logo is only protected if it’s displayed in those colors. (This only applies to applicants with actual use in commerce, meaning the business owner has already sold goods or services using the specific logo.) Those intending to use a logo for service later will be required to show this proof later on.Īlso consider the final version of the logo. A JPG or PDF file of a “specimen” that shows an example of how the logo appears on the product or service itself.If your logo is in color, you also need a description of the colors and where they’re used A JPG image file of the final version of the logo or design.Product(s) or service(s) the logo will represent, along the class of goods or services for which you’re registering the trademark.(Note: Individuals and businesses who are based outside of the US will need to hire a lawyer to complete this process.) Name, address and personal details of the entity filing for the trademark.Prepare the following information for the application process: This can save time and effort in the long run, especially in the event of any unforeseen complications. Lawyers will be able to write descriptions of the logo using language that’s common and understood by the USPTO better than beginners to the process. A patent and trademark attorney may be helpful with guidance for this process. Because applications can be entirely rejected for small errors and fees are not refundable, it’s important to ensure each part of an application is correct before submitting. The application process can be time-consuming and complex. This may be especially beneficial with graphic marks. Attorneys are trained in special techniques to perform a more thorough search before an application is submitted. Some experts, including those who wrote the USPTO website, recommend hiring an attorney or a specialized service to conduct this search on behalf of a business owner. Search for existing trademarked logos on the USPTO website using the Trademark Electronic Search System (TESS). Logos cannot be generic and should always be unique to the business. An application may be rejected if the logo submitted is likely to be confused with existing logos for comparable goods or services. Search for Existing Trademarksīefore applying for a logo trademark, it’s important to search for existing trademarks that may bear any resemblance. If nationwide protection is needed, then registering a logo with the USPTO is a wise step. Common law legal protection for a trademark only applies to the geographic area where the business operates. Once a business begins to use a logo to advertise and sell goods or services, they automatically attain common law ownership and the limited protections associated with it-but only if the business can prove it was the first businesses to use the mark. It’s important to first consider whether a trademark registration with the USPTO is necessary, since the process requires time, effort and money. If based outside the U.S., a patent attorney will be required to make the filing. Anyone can apply online on the USPTO website if the business for which they’re authorized to file is principally located inside the U.S. How to Trademark a LogoĪ unique logo can be trademarked by registering it with the USPTO. Other companies providing similar goods or services face harsh penalties for using a design similar to a trademarked logo, including foreign entities that import products into the U.S. By trademarking a logo, business owners acquire legal protection against counterfeits, copycats and fraud. On 's Website What Is a Trademark?Ī trademark can be a word, phrase, symbol or image unique enough to register as a business’ exclusive brand. It is aimed at both beginners and professionals alike, thanks to its intuitive and customizable interface that has something for everyone. Luminar is an all-in-one photo editor with excellent RAW editing capabilities. inPixio offers users a quality photo editor that lets anyone create stunning images. The Pro version of the tool employs one-click image correction to automatically improve the quality of your photos in less than a second. Even better is the background erasing ability.” – “This is the best software I have come across for quickly and easily removing unwanted elements from a photo. Advanced cropping and a versatile text tool to annotate your photos let you take a raw image and modify it in just about any way imaginable. Visual settings such as brightness, contrast, and saturation can be modified to create perfect images. Once items have been selected and removed from a photo, they can be pasted to any background to make creative photomontages or collages.Ī creative blur can be used on portions of a photo to highlight certain elements and give the image an artistic touch. The tool’s developers merge the fields of photography and technology in their products, providing users with a powerful and easy-to-use photo-editing application.įeatures available with inPixio include the ability to cut out any unwanted details in a photo with just a few clicks. InPixio Photo Studio 11 is a photo editing solution for Mac that delivers an impressive array of advanced features that enable you to take full control of your digital photographs. You should add Fotor to your photo editing toolbox today. This makes it easy to discover the features that will make your images stand out from the crowd. “A free photo editor with smart filters that will make your pictures look incredible with a single click.” – įotor provides users with informative tutorial videos which walk you through the process of editing your photos and creating graphic designs. You can always look your best by touching up your photos before posting them. Add clip art to your creations and choose from hundreds of fonts to achieve the exact design you want.Ī great feature of this tool is the ability to beautify a photograph by taking actions like eliminating wrinkles and blemishes. Taking advantage of the large selection of templates lets you easily create photo cards, invitations or leaflets. Within the editor, you can modify any aspect of the photo that you desire, including size, coloration, brightness, and contrast to name just a few. You begin an editing session by importing the photograph of your choice from your computer, Dropbox, Facebook, or the Fotor Cloud. Once that is complete, you have access to a wide variety of tools that enable you to edit your photos and design stunning collages and images using their large selection of templates. Getting started with the photo editor requires you to sign up for a free account. It is free to use and also offers a modestly priced Pro version with enhanced capabilities. Overall, Pixelmator is a great Mac photo editing software that can produce stunning results in the hands of the gifted artist.įotor Online Photo Editor is packed with features that make creating beautiful images as easy as executing a few clicks on your computer. “Pixelmator is a great photo editor app alternative to Adobe Photoshop for iPhone, iPad and Mac.” – The result is a noticeable fast image processing. The combination of technologies used includes Open GL, Core Image for Mac’s graphics card, Open CL for parallel computing, and 64-bit architecture. The app works on a layer-based image editing technique, where different layers can be arranged and grouped for processing. Thus, the tool allows not only photo processing but also graphics creation, such as logos, etc. This set of powerful tools allows users to edit photos, sketch, draw, paint, and add shapes and more than 160 effects. Just for color correction, it has 16 tools and more than 50 filters. This software has many features, including more than 40 tools for selection, painting, retouching, navigation, color correction, and color management, GPU-powered image processing, pixel-accurate selection, and more. Pixelmator is a photo editing for Mac app developed by two Lithuanian brothers and based on a combination of open source and Mac OS X technologies. Here below is a picture of the 5 best tools in 2022, each of them with different features, which allow readers to choose according to their needs. Luckily, there are many applications that can assist Mac lovers with these tasks. Organizing and fixing them according to personal tastes can be tricky. They can be taken from cell phones, computers & cameras. Photos are part of people’s lives in modern times. Production processes and audio techniques are making captions/subtitles more valuable to an ever-increasing share of the audience. In fact, get human beings who SPEAK THE DIALECT to do it, so that you don’t get the amusing but jarring effect when some American captioner applies an American word where a British English (or worse – Scots or Geordie or Cockney dialect!) word is actually being spoken.” Always pick the SDH if they’re available, they have a miniscule chance of being more accurate, and they more often include SFX and music indicators.Īlthough I am grateful our Raku doodad has its own captions settings that (SOMETIMES) operate independently of the streaming channel’s, it’s uneven at best.Ĭontent Producers, LISTEN UP: “NO, AI is NOT yet ready to do in-line captioning, so KNOCK THAT SH*T OFF and get actual human beings to actually do captions. Sometimes you get a choice between plain “captions/subtitles” and “SDH captions” (“Subtitles for Deaf and Hearing-Impaired”, I think). THANK YOU, Athena! As a hard-of-hearing person I rely on subtitles for everything and this problem annoys the crap out of me. whether it be background conversation, SFX, or indication of tone. People who use subtitles deserve just as good of a viewing experience as non-users, and deserve the same amount of information that non-users get. The fact that a 100-million-dollar show has fucking garbage ass subtitles says a lot about how much they care about accessibility. It was very strange.Īll this is to say, HBO Max needs better options for their subtitles, and better ACTUAL SUBTITLES. Plus, there was a huge mix of caps lock VS not caps lock. Sometimes it would say who was speaking, then for the next five times someone spoke it wouldn’t. At first, I was happy that it would specify who was speaking, but it was short lived, as it was completely inconsistent. How are you going to watch South Park without knowing who is speaking sarcastically?! It’s important stuff!įinally, I tried HBO Max’s big seller, Game of Thrones. Again, no indication of which character was speaking, or in what tone. The subtitles on The Book of Life were weirdly delayed though, not by much, but enough that I noticed it.įollowing that, I tried South Park. It indicated when someone was singing rather than speaking by putting a music note before the line, included background conversation, and showed when a character sighed, grunted, etc. Why would you ever put subtitles in nothing but caps?! It also did not indicate tone, who was speaking, etc. For Teen Titans, I was surprised by the fact that the subtitles were all in caps lock. I turned on Teen Titans to see how they compared. So, I started to wonder if other shows/movies on HBO Max were just as bad, or if it was just their newest, most popular, biggest budget show that had shitty subtitles. These are important aspects of subtitles! And there’s zero choice of this on HBO Max. Amazon Prime gives you four choices of font size, as well as the choice to make the background of the subtitles opaque or solid. Unlike Amazon Prime, on HBO Max you can’t choose the size or transparency of the subtitles. They also include no SFX, which means no “monster screeching”, “zombie clicking”, “guns shooting”, “explosions”! How are you going to leave out the zombie noises entirely, in a zombie show?!Īside from all this, I’m also upset about the lack of choices when it comes to the subtitles themselves. What do I mean by “bad” subtitles, though? How can subtitles be bad, and what would good ones look like? I’m glad you asked! I was frustrated by the subtitles for The Last of Us, because they left out entire words on several occasions, they don’t indicate who is speaking, or in what tone anyone says anything, they don’t include things like sighing, gasping, exclaiming, or include any background conversation. You would think that such a huge, expensive, and widely-anticipated show would cater better to its subtitle-using audience, but you’d be severely disappointed. I have also been watching it with subtitles, and I’m shocked at how garbage they are. I, like many others, have been watching The Last of Us on HBO Max. HBO Max Subtitles Need To Get With the Program Click on a game in the Savannah Ghost Pirates schedule above to see the seating chart displayed. TicketSmarter provides an interactive seating chart for every ECHL game or event. Each team in the league has their own arenas, which generally range from a seating capacity of 5,000 to 17,000. Sections 106 and 107 bring guests to center-ice. Cheap lower level seats can be found in sections 101 and 112. The upper level is a horseshoe shape and lacks seating behind one of the goals. The 2019 All-Star Game was held in the 8,000-seat Huntington Center, home of the Toledo Walleye. Savannah Ghost Pirates Seating ChartĮvents like the ECHL All-Star Game rotate to a different team’s arena each year. Orlando Solar Bears game are currently at a starting price of $34.00 and a maximum price of $957.00. Tickets for the Savannah Ghost Pirates vs. This will be a highly anticipated ECHL game that could potentially have playoff implications. Orlando Solar Bears tickets are on sale now with 389 currently listed on TicketSmarter. Hockey fans never need a presale code to get their tickets from TicketSmarter. All-Star and playoff game tickets can be purchased a few weeks before they begin. Savannah Ghost Pirates tickets go on sale shortly before the season begins in October. When do Savannah Ghost Pirates tickets go on sale? Enmarket Arena at 620 Stiles Avenue, Savannah, GA will host the game, which will be one of the final games for the Savannah Ghost Pirates this season. Orlando Solar Bears game on April 15th, 2023 at 7:00pm. You don't want to miss out on seeing the upcoming Savannah Ghost Pirates vs. Browse through the Savannah Ghost Pirates schedule above to see the latest available ticketing information.Ģ2 games are left on the Savannah Ghost Pirates schedule for this current season. The all-stars from each conference will play in a four-team, 3-on-3 format for a chance to take home the All-Star Game honors. Halfway through the regular season, qualifying players will compete in the ECHL All-Star Game. Teams will play a 72-game regular-season schedule and the Savannah Ghost Pirates will frequently play against other teams in their division. The Savannah Ghost Pirates regular season begins in mid-October and concludes in early-April. Savannah Ghost Pirates game at Bon Secours Wellness Arena will span from $23.00 to $68.00. Ticket prices for that Greenville Swamp Rabbits vs. The Savannah Ghost Pirates next game at Bon Secours Wellness Arena will take place on February 22nd, 2023 at 7:05pm. The average price for a ticket throughout the season is around $102.86, while a $591.00 price point will get you into the best seats in the arena. Savannah Ghost Pirates tickets will be priced similarly to the rest of the league with tickets starting at $18.00. Playoff tickets can usually increase in price by around 50% to 75%. Seats that are closer to center-ice tend to increase in price and can be found in the $40-$50 range. Lower level seats for most ECHL games will start in the $15 to $30 range. How much are Savannah Ghost Pirates tickets? Playoff hockey tickets can also be significantly more expensive than regular season tickets. Teams that are playing at a high level generally have more expensive tickets. There will be a variety of factors that impact Savannah Ghost Pirates ticket prices. Witness history in the making as this determined team takes its first steps in professional ice hockey. Grab a pair of Savannah Ghost Pirates tickets today to see all the intense hockey action up close and in person. Whether you are a Savannah local, just passing through or simply want to see this newest ECHL team test its mettle, you will not want to miss the next Ghost Pirates game. The Ghost Pirates’ team colors are black, white and green. A formidable structure, the Enmarket Arena seats roughly 10,000 and includes a dozen luxury suites. They play out of Savannah’s Enmarket Arena, which finished construction the same year. The Savannah Ghost Pirates were created in 2021 as part of an agreement between the city of Savannah and Andy Kaufman, owner of the Jacksonville Icemen. They are a minor league team that competes within the East Coast Hockey League, a joint US and Canadian league that together with the American Hockey League makes up the second tier of professional hockey in North America. The Savannah Ghost Pirates are a professional hockey team from Savannah, Ga. See one of the hottest new teams in action on the ice with Savannah Ghost Pirates tickets. Create a mandatory configuration file with a localhost option.Create a configuration directory for tigerVNC.Make it accessible only by means of a tunnel For security reasons, restrict VNC network access to localhost. When asked if you want to enter a view-only password, press “n”.Ĥ. Configure a VNC password (6 to 8 characters) Note this password, you will need it later to connect to the instance.# MATE for all users sudo bash -c 'echo PREFERRED=/usr/bin/mate-session > /etc/sysconfig/desktop' # MATE for the current user only (ec2-user) echo "/usr/bin/mate-session" > ~/.Xclients & chmod +x ~/.Xclients Sudo amazon-linux-extras install mate-desktop1.x # Check your linux os grep PRETTY_NAME /etc/os-release # RETURNS => PRETTY_NAME = "Amazon Linux 2" # Update packages on your instance sudo yum update # Reboot your instance sudo reboot Confirm your Linux OS, update the packages on your instance and reboot.In case you need to interact with your ECS instance using a GUI, you can install one using the steps below Sample GUI Image Very often, you do not need a GUI as you can interact with your EC2 instance using command line tools like PUTTY or browser-based CLIs. Multiple instance types, operating systems, and software packages are available to users EC2 easily integrates with AWS S3, RDS, and SQS to provide a complete solution for computing, query processing, and storage across a wide range of applications. Ease of integration with other AWS services.AWS EC2 instances can be rapidly and predictably commissioned. EC2 instances are located in a Virtual Private Cloud (VPC) and you decide which instances public or private Pay only for the compute capacity you consume. Amazon EC2 lets you increase or decrease capacity within minutes In stalling a Graphical User Interface (GUI) on AWS EC2 Linux-2 Instance and accessing it over a secure tunnel on WindowsĮlastic Compute Cloud (EC2) is one of the most popular services on Amazon Web Services (AWS). When he broke into their house, the large dragon approached Hiccup, who was just a baby at the time. Hiccup was actually the first member of the Haddock family Cloudjumper met. They share a strong bond that Hiccup admires. Because of this experience, they share a wordless shorthand while flying, and Cloudjumper can instinctively know when Valka wants him to attack or move. In other circumstances (ones who could not have dragons like Modern AU), Cloudjumper would normally play the part of an animal, most commonly an owl.Ĭloudjumper has been her faithful dragon companion for the past 20 years, and was in fact the dragon that abducted her. Because of this, fans are allowed to fill in the blanks and do whatever they want with Cloudjumper. Though not as dependent on Valka as Toothless is to Hiccup, Cloudjumper is most relegated to stories that present Valka (not Valhallarama), and is unlikely to be seen beyond this. Keeping in line with his owl-like physiology, he can turn his head 360 degrees with no signs of strain or difficulty. Like other Stormcutters, Cloudjumper can shoot a sustained torrent of fire, and have fore-talons on their wings that are hooked and can be used to pick dragon trap locks or destroy an entire war machine. In a deleted scene, Hiccup applied Cloudjumper's saliva to the sword, causing it to flame-up uncontrollably, implying that his (and by extension, all other Stormcutters) saliva is far more potent than most Monstrous Nightmares. This body structure allows him to demonstrate accurate flight techniques such as navigating through narrow and complicated spaces, or hovering and even rest in midair. Their 'X-wing' beats up and down in sync and are probably used for extremely tight turns, maneuvers and fighting. Thanks to the unique body structures and heavy build, Cloudjumper is indeed a very sharp and formidable hunter and a fighter. Though he is mostly serious, he knows how to have fun, shown when he pours snow on Toothless. Cloudjumper's pride, large size and confidence leads him to believe that he is the top dragon in Valka's mountain, second only to the Bewilderbeast who is the true King. He is also sensible to support Valka in many occasions without clear communications. Based on portraits seen in the films, however, he seems much larger than these measurements, possibly over 22-24m in length and 22m or more in wingspan.Ĭloudjumper is proud and dignified, and as a result is not as playful as Toothless, but kind enough to scatter away baby dragons who trifle with Toothless. He is not a maximum-sized specimen of his race 9.5m (31 feet 3.25 inches) long, 14.6m (48 feet) in wingspan, and weighs 2,500 pounds. Cloudjumper also has two scars on his eyebrow-like spines, and he has tentacle-like spiked spines behind his 'eyebrows' which can swivel to become wider when he is curious and can fold back when threatened or upset. The talons on his wings are dextrous enough to pick the lock on a dragon trap, yet sharp enough to destroy Drago's war machines. On his back he has spikes that resemble the Skrill's. The dragon's face has two long spines that branch off his nose and to the side and he has a "smashed" face, kind of like an owl's. He has a very muscular and sturdy build and walks on 2 legs and his 2 bottom wings. His 'X-wing' beat up and down in sync and are probably used for extremely tight turns and maneuvers and for fighting foes. All that is known is he has an owl mannerism and a second set of wings under his main ones that can splay and become an 'X-wing'. Securing Access to the Cloudflare Account Http : ip_ban_enabled : true login_attempts_threshold : 5 use_x_forwarded_for : true trusted_proxies : - 172.30.33.0/24 Paste the following lines inside the configuration.yaml and save. This will enable IP banning after 5 failed logging attempts and the processing of the original web client IP address via the x-forwarded-for header in Home Assistant. Enable IP banning and the x-forwarded-fore header use in Home Assistant.Go to the add-on configuration and provide you external hostname and Cloudflare tunnel name. Select the Cloudflared addon from the list and click install. Select repositories from the upper right menu. Go to Settings, Add-ons, and Add-on Store. To install this add-on, manually add the HA-Addons repository link to Home Assistant. And the last prerequisite is to decide whether to use a local or managed tunnel (We are going to use a local one).You have to have a working Cloudflare setup with a domain name, and we already have that, so we are good to go.That means if you already have the DuckDNS add-on, Let’s Encrypt add-on, or something similar, or you have manually configured some SSL certificates in your Home Assistant, you have to remove them. Make sure to remove all other add-ons or configuration entries handling SSL certificates.Read the full add-on documentation Installation Especially section 2.8 could be breached when mainly streaming videos or other non-HTML content. Please make sure to be compliant with the Cloudflare Self-Serve Subscription Agreement when using this add-on. If you do not have one, you can get one for free at Freenom. To use this add-on, you have to own a domain name (e.g. Additionally, you can utilize Cloudflare Teams, their Zero Trust platform, to further secure your Home Assistant connection. It exposes your Home Assistant to the Internet without opening ports on your router. Using or Home Assistant cloud is recommended.Ĭloudflared connects your Home Assistant instance via a secure tunnel to a domain or subdomain at Cloudflare. This technical note helps with the configuration and several security measures, but use this configuration or the Cloudflare Tunnel at your own risk. Publishing Home Assistant directly on the internet is not without any risk. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |